![background image](http://html1.mh-extra.com/html/xantrex/xfr-100-12/xfr-100-12_operating-manual_881549022.webp)
Features and Specifications
Rear Panel Connectors and Switch
Release 3.1
19
Rear Panel
SW1 Switch
The SW1 Programming, Monitoring, and Shutdown Select switch is an 8-position
piano DIP switch located on the power supply’s rear panel. See Figure 1.3. The SW1
switch enables you to choose:
•
Resistive programming of output voltage or current limit
•
Output voltage and current limit programming scales
•
Output voltage and current monitor scales
•
Remote shutdown circuit logic
•
Over temperature shutdown mode
Figure 1.3
Programming and Monitoring SW1 Switch
(Switch is shown in factory default configuration.)
Table 1.2 shows the functions assigned to each SW1 switch. Factory defaults are
underlined.
Table 1.2
Rear Panel SW1 Switch Assignments
1 Resistive Programming of Output Voltage
2 Resistive Programming of Output Current
3 Selects Output Voltage Programming Source Range
4 Selects Output Current Limit Programming Source Range
5 Selects Output Voltage Monitor Range
6 Selects Output Current Monitor Range
7 Selects Remote Shutdown Logic
8 Selects Over Temperature Shutdown Reset Mode
Switch
Function
Open
Closed
SW1-1
1 mA current source for resistive
programming of output voltage
Voltage source
programming
Resistive programming
(0-5 k, 0-10 k)
SW1-2
1 mA current source for resistive
programming of output current limit
Voltage source
programming
Resistive programming
(0-5 k, 0-10 k)
SW1-3
Output voltage programming source range
select
0-5 V (0-5 k)
0-10 V (0-10 k)
SW1-4
Output current limit programming source
range select
0-5 V (0-5 k)
0-10 V (0-10 k)
SW1-5
Output voltage monitor range select
0-5 V
0-10 V
SW1-6
Output current monitor range select
0-5 V
0-10 V
SW1-7
Remote shutdown logic select
HIGH=OFF
HIGH=ON
SW1-8
Over temperature shutdown reset mode
select
Auto reset
Latch OFF
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com