![background image](http://html1.mh-extra.com/html/xantrex/xc3012/xc3012_owners-manual_3320773008.webp)
Safety
vi
975-0187-01-01
8.
The XC Series is provided with an AC ground conductor that must be
connected to the AC input ground and a DC ground stud which must be
connected to the DC system ground.
9.
For marine applications in the United States, external connections to the
charger shall comply with the United States Coast Guard Electrical Regulations
(33CFR183, Sub part 1).
Explosive Gas and Battery Precautions
1.
Read this guide and follow the instructions exactly before installing or using
your XC Series.
2.
Follow all instructions published by the battery manufacturer and the
manufacturer of the equipment in which the battery is installed.
3.
Working in the vicinity of lead-acid batteries is dangerous. Batteries generate
explosive gases during normal operation.
4.
The XC Series has been approved as Ignition Protected. It may be installed in
areas containing gasoline tanks and fittings which require Ignition Protected
equipment. Xantrex recommends, nevertheless, that it is safest not to install
electrical equipment in these areas.
5.
Make sure the area around the battery is well ventilated.
6.
Never smoke or allow a spark or flame near the engine or batteries.
7.
Use caution to reduce the risk of dropping a metal tool on the battery. It could
spark or short circuit the battery or other electrical parts and could cause an
explosion.
8.
Remove all metal items, like rings, bracelets, and watches when working with
lead-acid batteries. Lead-acid batteries produce a short circuit current high
enough to weld metal, causing a severe skin burn.
9.
Have someone within range of your voice or close enough to come to your aid
when you work near a lead-acid battery.
WARNING: Explosion or fire hazard
XC_Charger_Owner.book Page vi Friday, August 12, 2005 3:23 PM
Summary of Contents for XC3012
