![background image](http://html1.mh-extra.com/html/xantrex/truecharge-tc10/truecharge-tc10_owners-manual_3246241008.webp)
8
Three-Step Charging Process
Modern lead-acid batteries will last longer and charge faster if they are
charged in a particular sequence known as a
three-step charge.
The
Truecharge 10 implements the three-step charging process.
In the first step, known as the
bulk charge
, the Truecharge 10 delivers its
rated current (10 A) until the battery voltage approaches its
gassing
voltage
—typically around 14.4 volts. The bulk charge step restores about
75% of the battery's charge.
The gassing voltage is the voltage at which the electrolyte in the battery
begins to break down into hydrogen and oxygen gases. Under normal
circumstances, a battery should not be charged at a voltage above its
gassing voltage since this will cause the battery to lose electrolyte and
dry out over time. Therefore the Truecharge 10 transfers to the next step,
known as the
absorption charge
.
During the absorption charge, the charging voltage is held constant near
the gassing voltage and the charging current is steadily decreased. When
the charging current has decreased to approximately one ampere, the
battery is fully charged. At this point, the Truecharge 10 transfers to its
final step, known as the
float charge.
The float charge is a maintenance mode in which the Truecharge 10
output voltage is reduced to a lower level, typically about 13.5 volts, to
maintain the battery's charge without losing electrolyte through gassing.
Unlike many other chargers, the Truecharge 10 can be left connected to
your battery indefinitely without risk of overcharging.
The voltage levels mentioned in the paragraphs above are dependent on
the type of battery (sealed vs. flooded) and on the temperature of the
battery. The Truecharge 10 is equipped with selector switches to allow
you to set it for your battery type and temperature.
Charger Operating Sequence
The microprocessor in the Truecharge 10 is constantly checking to
ensure that the charger is working properly.
Once AC power is connected to the Truecharge 10, the microprocessor
begins by checking whether a battery is connected properly to the
charger. The Truecharge 10 will only start charging if the following
Summary of Contents for Truecharge TC10
Page 1: ...TC10 Owner s Manual Xantrex Truecharge 10 Battery Charger TM...
Page 2: ...2...
Page 24: ...24...