![background image](http://html1.mh-extra.com/html/xantrex/solar-784-0110/solar-784-0110_installation-manual_3327382005.webp)
Basic Installation Steps
Safety Instructions
Before beginning your installation:
n
Read this entire Installation section so you can plan the installation from beginning to end.
n
Assemble all the tools and materials you require for the installation.
n
Be aware of all safety and electrical codes which must be met.
WARNING
ELECTRICAL SHOCK AND FIRE HAZARD
n
The power system must be designed by a certified vehicle solar system designer and installed
by a certified solar system technician.
n
All wiring should be done by qualified personnel to ensure compliance with all applicable
installation codes and regulations.
n
Disconnect all power sources.
n
Disable and secure disconnect devices.
Failure to follow these instructions can result in death, serious injury, or equipment
damage
Tools and Materials
You may need the following tools to install the Solar Max Flex Panel:
n
Wrench set
n
Torque driver
1. Plan the power system and where to mount the solar panel.
a.
The Xantrex Solar Max Flex Panel comes in the following power levels:
110 W standard, 110 W slim, 220 W, and 330 W
b.
Draw your power system on paper similar to
.
Figure 1 Cable Schematic
1
2
4
3
1
Solar panel
See section on Solar PanelWiring for more
information.
3
DC fuse (or battery disconnect)
2
Charge controller (PWM or MPPT)
See section on Solar PanelWiring for more
information.
4
Battery (12Vor 24V)
975-1029-01-01 Rev B
June 2022
6