25
input cable is plugged in but the PowerSource
Mobile 100 is not charging, the LED flashes red
(internal battery charging is terminated when
inverter output power is over 65 W).
A typical recharge may take up to 4 hours.
Important:
When charging the unit with the DC input
cable, you can turn the PowerSource Mobile 100 on and
operate devices that consume less than 65 W from the AC
outlet or USB ports. Any power not consumed by the
devices will charge the PowerSource Mobile 100.
However, operating devices from the PowerSource Mobile
100 while it is being charged with the DC input cable will
lengthen the internal battery recharge time.
XP_Powersource_Mobile_100.book Page 25 Wednesday, August 16, 2006 11:29 AM