![background image](http://html.mh-extra.com/html/xantrex/gt5-0-na/gt5-0-na_owners-manual_881409043.webp)
4
Starting the Inverter
Chapter 4 contains information on starting up the Xantrex Grid Tie Solar
Inverter and performing a functional test.
The topics in this chapter are organized as follows:
•
“Startup Procedure” on page 4–1
•
“Commissioning Multiple Inverters” on page 4–3
•
“Disconnect Test” on page 4–5
Startup Procedure
Starting up the GT Inverter requires several steps. You will need to:
1. Ensure the DC/AC Disconnect switch is in the OFF position (see Figure 4-1).
2. Check the PV array DC voltage (see procedure below).
3. Check the AC utility voltage (see procedure below).
4. Replace the cover on the wiring box (see “Replacing the Wiring/Disconnect
Box Cover” on page 4–2).
5. Start up the GT Inverter by switching the DC/AC Disconnect switch ON.
WARNING: Shock hazard
Hazardous voltages are present from two sources. Use extreme caution during startup
procedure. Before applying power to the GT Inverter, ensure all AC and DC wiring is
correct.
Summary of Contents for GT5.0-NA
