![background image](http://html.mh-extra.com/html/xantrex/freedom-xi-1000/freedom-xi-1000_owners-manual_881397006.webp)
iv
Freedom Xi Owner’s Guide
Safety Information
1.
Before using the Inverter, read all instructions and cautionary
markings on the unit, the batteries, and all appropriate sections of
this manual.
2.
Use of accessories not recommended or sold by the manufacturer may
result in a risk of fire, electric shock, or injury to persons.
3.
The inverter is designed to be connected to your AC and DC electrical
systems. The manufacturer recommends that all wiring be done by a
certified technician or electrician to ensure adherence to the local and
national electrical codes applicable in your jurisdiction.
4.
To avoid a risk of fire and electric shock, make sure that existing
wiring is in good condition and that wire is not undersized. Do not
operate the inverter with damaged or substandard wiring.
5.
Do not operate the inverter if it has been damaged in any way.
6.
This unit does not have any user-serviceable parts. Do not disassemble
the inverter except where noted for connecting wiring and cabling. See
your warranty for instructions on obtaining service. Attempting to
service the unit yourself may result in a risk of electrical shock or fire.
Internal capacitors remain charged after all power is disconnected.
7.
To reduce the risk of electrical shock, disconnect both AC and DC
power from the inverter before attempting any maintenance or
cleaning or working on any components connected to the inverter.
Turning off the Inverter using the Inverter Power button n the front
panel will not reduce an electrical shock hazard.
8.
The inverter must be provided with an equipment-grounding
conductor connected to the AC input ground.
9.
Do not expose this unit to rain, snow, or liquids of any type. This
product is designed for indoor use only. Damp environments will
significantly shorten the life of this product and corrosion caused by
dampness will not be covered by the product warranty.
10. To reduce the chance of short-circuits, always use insulated tools when
installing or working with this equipment.
11. Remove personal metal items such as rings, bracelets, necklaces, and
watches when working with electrical equipment.
DANGER
ELECTRICAL SHOCK AND FIRE HAZARD
Installation must be done by qualified personnel to ensure compliance
with all applicable installation and electrical codes and regulations.
Instructions for installing the Freedom Xi Sine Wave Inverter are
provided here for use by qualified personnel only.
Failure to follow these instructions will result in death or serious injury.
Freedom XI Owners Guide.book Page iv Friday, September 18, 2015 2:57 PM
Summary of Contents for Freedom Xi 1000
