Xantrex Freedom XC 1000, Owner'S Manual

Page: 82 / 108

Operating in Grid Mode
66 Freedom XC Owner's Guide
Power Output
The Freedom XC can deliver up to 1000 watts (Freedom XC 1000)
or 2000 watts
3
(Freedom XC 2000) of continuous utility grade sine
wave AC power. The wattage rating applies to resistive loads
such as incandescent lights.
3
As the temperature on the Freedom XC 2000 rises, it will gradually reduce its continuous power output
from 2000 W at 40°C ambient to 1500 W before the over-temperature shutdown occurs at 60°C ambient.
See
Specifications on page 83 .
Input Voltage
The allowable Freedom XC input battery voltage ranges are
shown in the following table:
Operating
Condition
Battery
Voltage
Comment
Full
Operating
Range
LBCO –
18.0 volts
Assuming the battery is full, the
inverter/charger will operate until
battery voltage goes past below
LBCO
d
and LBCO Shutdown
delay timer
e
.
Low
Voltage
Recovery
< LBCO+0.2
volts Inverter is able to recover and
continue to operate.
Table 13 Input battery voltage range
d
To set LBCO, see Adjusting Settings in Configuration Mode on page 51 .
e
To set LBCO Shutdown Delay Timer, see Input Voltage on page 66 .