background image

Installing the Remote Panel Unit on the Wall

http://www.xantrex.com

PN: 808-0817 / 808-0817-02

Freedom X Remote Panel User Guide

7

A

976-0367-01-01 Rev D

09-2019

Copyright © 2018 Xantrex LLC. All Rights Reserved. 

All trademarks are owned by Xantrex LLC or its affiliated companies. Other trademarks are

owned by their respective companies.

page 3

Creating a Bluetooth Link with the Freedom X Remote Panel App

1. Download and install the FXC Control app into a 

compatible Android or iOS smart device.

The Freedom X Remote Panel app (

FXC Control

allows you to conveniently monitor and configure a 

Freedom X inverter (or a Freedom XC inverter/charger)

a

 

with a compatible smart device

b

 using a Bluetooth 

connection.

2. Turn on the Bluetooth enabled Freedom X Remote 

Panel by using the ON/OFF button on either its own 

front panel or the connected inverter’s front panel.

3. Launch the FXC Control app on your smart device.

4. Turn on the smart device’s Bluetooth through the 

Bluetooth toggle on the app. The app should now 

indicate that it is searching for devices.

5. On the Freedom X Remote Panel, press and hold the 

ESC button to enable Bluetooth pairing on the remote. 

Remote pairing can be observed by the two flashing 

horizontal lines underneath the left and right numbers.

6. When the app has detected the Bluetooth signal, it will 

display the connected inverter’s serial number in the 

app. Click on the serial number to complete the pairing 

process.

7. To stop the Bluetooth connection, disable the smart 

device’s Bluetooth connectivity.

_____________________________________

List of compatible Freedom X/XC units: 

817-1000, 817-2000, 817-2000-21, 817-3000,

817-1050, 817-2080, 818-2010, 818-3010, 806-1212

b

 Compatible smart devices: 

iPhone oriPad running iOS 8 or higher 

Android phone or tablet running v8 or higher with Bluetooth 

Low Energy compatibility

FXC Control

FXC Control

1. Place the template on the wall.
2. Mark the corners (or trace the dotted lines) of the 

recess outline on the wall.

3. Mark the two mounting holes for the two screws 

on the wall.

4. Remove the template from the wall.
5. Cut along the recess outline on the wall to make 

a hole for the remote panel’s body.

6. Pre-drill the mounting holes appropriate to the 

mounting screws (not provided) that will be used.

7. Connect the 6-conductor com cable to the RJ12 

ports on the inverter and remote panel.

8. Mount the remote panel unit on the wall.

recess outline

mounting

hole

mounting

hole

Mounting Template

126.0 mm

107.0 mm

51.0 mm

NOTE

: Ensure the inside wall is free of obstructions, 

such as pipes, insulation, and electrical wiring.
Ensure the recess depth is more than 50 mm.

allow enough 

space for 

connecting the 

com cable plug

38.0 mm

C

M

Y

CM

MY

CY

CMY

K

976-0367-01-01_Rev-D(artwork).pdf   3   9/25/2019   4:40:57 PM

Reviews: