Configuration
3–16
975-0330-01-01
Configuring Email
You can configure the Gateway to send Energy Harvest and System
Alarm email to several different email addresses.
Types of
messages
The Gateway can send four types of messages:
•
Alarm
•
Daily Harvest
•
Weekly Harvest
•
Monthly Harvest
Mail Server
Sets the name of the network mail server. Enter the server
name that was supplied by your Internet service provider. This should be
the same mail server used for the email program already on your
computer; for example,
smtp.isp.net
.
Server Type
Selects the type of email server. Select Domain if you use
the name of the server, such as
smtp.isp.net
. Select IP if you know the
numerical IP address of the server.
To configure each type of message:
1. Enable the message type. You can configure the Gateway to send one
or more message types.
2. Add an address list. For each enabled message type, enter one or
more email addresses (separated by commas) to receive email from
the Gateway.
3. Add a custom message for each enabled message type (optional). You
can add text (up to 200 characters) to be included in each email from
the Gateway. This text might include system information such as
inverter model and solar array specifications, or additional contact
information.
4. Click
Send Email
to send a test message to each address in the
address list. This helps ensure that the address list, message, and mail
server configuration are correct.
Note:
The basic information you entered under “Home” is also included
in any email messages the Gateway sends.