background image

25

©2001 Xantrex Technology Inc.

P/N 975-0027-01-01  Rev A  09/01

5.0 SERVICE INFORMATION

Xantrex Technology Inc., takes great pride in its products and makes every

effort to ensure your unit fully meets your independent powering needs.

If your product needs repair, contact our Customer Service department at:

(360) 435-8826 to obtain an RMA# and shipping information; or, fax this page with
the following information to: (360) 474-0616.  You can also contact us by email at
[email protected].

Please provide:

Model Number: _____________________________________

Serial Number: _____________________________________

Purchase Date: _____________________________________

Problem: ___________________________________________

Include a telephone number where you can be reached during business hours

and a complete return shipping address (P.O. Box numbers are not acceptable).

Name: _______________________________________________

Address: _____________________________________________

City: ________________________________________________

State / Province: _______________________________________

Zip / Postal Code: _____________________________________

Country: _____________________________________________

Phone: (__________) ___________________________________

FAX: (__________) _____________________________________

E-mail Address: _______________________________________

Summary of Contents for ALM - REV A





































Reviews: