![background image](http://html1.mh-extra.com/html/xantrex/818-2010/818-2010_owners-manual_881301054.webp)
Basic Installation Procedures
38
Freedom XC PRO Owner's Guide
Step 7: Connecting to Port(s) on the
Freedom XC PRO
Figure 13 Freedom XC PRO Ports
4
3
2
1
1
20-pin CC port
2
Remote port
3
BTS port
4
USB port
NOTICE
EQUIPMENT DAMAGE
Do not use pinouts (see
) that are designated
"NOT USED" to connect to equipment not currently supported.
Failure to follow these instructions can result in equipment
damage.
Connecting to the 20-pin Communications
and Control (20-pin CC) Port
The 20-pin CC port of the Freedom XC PRO accepts a
corresponding 20-pin Communications Harness (PN: 808-0820)
(see
Connecting to the 20-pin Communications and Control (20-
) which enables the unit to:
n
control the vehicle’s ignition control system (commonly
referred to as ACC) via one control wire (see
);
n
connect to a vehicle’s onboard display via three wires using
the CANbus/RV-C, J1939 protocol.
Figure 14 20-pin Communications Harness