Xantia 81137, Instructions Manual

Page: 16 / 18

16
EN
17. Always fill the kettle with water before switching it on.
18. The kettle is designed to disconnect the live electrical supply from the element abnormal operating condi-
tions. If the water kettle is accidentally switched on without water, the boil dry protector will operate.
19. If the kettle ever boils dry, the power indicator will go out. Allow 15 minutes to cool down. The safety
cutout will automatically reset during this time. Remove the kettle from the power base and fill with cold
water. The appliance will function again.
20. Place the kettle on a stable flat surface.
21. Do not use this appliance outdoors.
22. Ensure that the kettle is switched off before removing it from its base.
23. Do not remove the kettle from its base during operation.
24. Never immerse the kettle or cord in water or any other liquid. Do not allow liquid to penetrate the electri-
cal parts of this kettle.
25. Prevent children from pulling on the mains cord or knocking the kettle over.
26. Ensure that the mains lead does not overhang the worktop surface.
27. The outside surface of the kettle may get hot during use, please take care when using the kettle.
28. Never fill in water more than the maximum acceptable water level.
29. Never use the kettle with the lid open.
30. Do not open the lid when steam is coming out of the spout.
31. Before cleaning the kettle disconnect from the power supply and wait until it was cooled down.
Before first use
Before first use, it is recommended to operate the kettle for 2 or 3 times following the instructions above, this
will remove any dust or residues remaining from the manufacturing process.
1. Take up the jug kettle from the base before filling.
2. To fill the jug kettle, open the cover by pressing the lid button , then fill to the desired level (min0.
5L-Max.1.7L), close the lid by pressing it down until it clicks into place.
3. Plug the power supply cord into the main, press the On/Off switch, the power indicator lights up.
4. When the water has boiled the kettle will automatically switch itself off, you can stop the boiling process
at any time by lifting the On/Off switch. The power indicator will go out.