background image

XT-SW41-4K18G

  

USER MANUAL

10019345 REV-A0

®

© 2018 XANTECH

®

 is a registered trademark of Nortek Security & Control.

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and 
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

CAUTION

 - changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate 

the equipment.

CANADA, INDUSTRY CANADA (IC) NOTICES 

This Class B digital apparatus complies with Canadian ICES-003.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, 
including interference that may cause undesired operation of the device.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or 
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used 
device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for 
environmentally safe recycling.

Certifications

tech support:

[email protected]

main:

1 (800) 472-5555 - US
1 (707) 283-5900 - International
1 (707) 283-5901 - Fax

web:

www.xantech.com

Summary of Contents for XT-SW41-4K18G








Reviews: