XT-HDMI-MX42-4K18G
USER MANUAL
www.xantech.com
®
Panel Description
Front Panel
IR receiver window for matrix control
Power LED indicator
HDMI output selection buttons 1-2. Press to scroll through source inputs per HDMI output
1
2
3
1
2
Rear Panel
IR input - 3.5mm stereo jack provides zone specific routed IR
receiver input
IR output - 3.5mm mono jack provides routed IR emitter
output for discrete control of sources
Coaxial digital audio output - RCA (SPDIF)
Analog L/R audio output - 3.5mm stereo audio jack,
Supports 2 channel PCM only
Power on/off switch
EDID DIP switch - Used to manage the video and audio
resolution output by the connected source device.
HDMI inputs - connect to HDMI source devices
HDMI outputs - connect to HDMI display devices
RS-232 Serial port - For control of switcher by third party control
devices
IR input for matrix control
Power port - Use included 12V/2A DC power adaptor
4
7
9
14
13
9
5
10
10
12
8
11
3
4
11
6
7
6
8
12
13
14
5
IR
Power
Output 1
Output 2
1 2 3 4
1 2 3 4
XT-HDMI-MX42-4K18G
HDMI 4K 18Gbps 4x2 Matrix
O
n/
O
ff
3 2
EDID
1
1
0
0
12V 2A
IR Ext.
RS-232
HDMI 1
IR Out 1
IR Out 2
IR Out 3
IR Out 4
IR In
L/R Out
Coaxial
HDMI 2
Input
Source
HDMI 3
HDMI 4
HDMI 1
HDMI 2
Output
Zone 1
IR In
L/R Out
Coaxial
Zone 2
IR
Power
Output 1
Output 2
1 2 3 4
1 2 3 4
XT-HDMI-MX42-4K18G
HDMI 4K 18Gbps 4x2 Matrix
O
n/
O
ff
3 2
EDID
1
1
0
0
12V 2A
IR Ext.
RS-232
HDMI 1
IR Out 1
IR Out 2
IR Out 3
IR Out 4
IR In
L/R Out
Coaxial
HDMI 2
Input
Source
HDMI 3
HDMI 4
HDMI 1
HDMI 2
Output
Zone 1
IR In
L/R Out
Coaxial
Zone 2
OUTPUT AND INPUT SELECTION
A
Selects the zone OUTPUT you wish to change the source on (Numbers 1 - 2 correspond to
the zone outputs 1 - 2)
B
Selects the source INPUT you wish to change on the selected zone (Numbers 1 - 4
correspond to the source inputs 1 - 4)
EXAMPLE
: To switch source 2 to zone 1 you would press 1 in the output section (A) followed
by pressing 2 in the Input section (B).
ALL button:
The all button selects all the
inputs or outputs in its corresponding box.
Example:
(The “All” button in the Output box selects all the zones so all zones will change to
what source input is selected next)
PTP:
This button will align all the zone outputs with the like numbered source inputs. Example:
Input 1 to output 1, input 2 to output 2, etc
Remote Control Description
