08905180B
-
12
-
ADDITIONAL NOTES:
THREADED INSERT FOR INSTALLATION OF BASE UNIT IN PUBLIC PLACES:
A) Remove the two race track shaped bump-ons from the bottom of the docking station to expose
two threaded inserts.
B) Use M4x0.7 machine screws (not supplied) to secure the XIS100 base unit in place.
C) While screw length will be determined by mounting surface thickness, XIS100’s maximum
thread depth is 8mm.
CONTROL COMMANDS – RS232 SERIAL STRING COMMANDS
See document 08905193 – XIS100 Serial Protocol. Available on
www.xantech.com
PRODUCT DIMENSIONS AND PACKAGE WEIGHT
BASE STATION
6” W x 4-1/4” D x 1-1/4” H (153 mm x 108 mm x 32 mm)
REMOTE CONTROL
6-1/8” L x 1-3/4” W x 5/8” H (156 mm x 45 mm x 16 mm)
PACKAGE WEIGHT
2.2 lbs (1.0 kg)
Xantech Corporation
13100 Telfair Avenue, Sylmar CA 91342 | Xantech.com
Installation Instructions, XIS100 © 2008 Xantech Corporation 102708230PM
Document # 08905180B
This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior
written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial
errors/omissions made in this document.
iPod is a registered trademark of Apple Computer, Inc. All other marks are registered trademarks and trademarks of
Xantech Corporation. All rights reserved.
