8
STEP D.
Carefully tighten the dog-ear screws until the frame is flush with the wall. For the in-wall frame, start with the center dog-ear
clamps. Then use a level to correctly align the speaker and then tighten the remaining dog-ear clamps. For the in-ceiling frame, start
with one dog-ear clamp and then tighten the dog-ear clamp on the opposite end. Do not excessively tighten the dog-ear clamps. Doing
so will cause damage to the wall and speaker frame.
STEP E.
The final step is to install the grill. The grill fits into the speaker frame recess. Starting at one corner or side, gently press the
grill into the recess. Continue around the frame a bit at time. Do not excessively handle the grill. Doing so will dent and/or bend the grill
out of shape, thus harming the appearance.
XANTECH CORPORATION
13100 Telfair Avenue
Sylmar, CA 91342
Phone 818-362-0353 Fax 818-362-9506
www.xantech.com
Part No. 08905065 Rev X2 09-19-06
© 2006 Xantech Corporation
