-
4
-
INSTALLATION – SMVID01: Video Sensor Module
The SMVID01 sensor module provides status feedback by monitoring the composite video
connection. The sensor head is placed in between and input and output video signal. For instance,
the sensor head is placed between a video display and a DVD player on the composite video cable.
(1) Plug the 1/8” (3.5mm) mini-plug into the sensing controller (CBCSM1 and MRC platform
provides power to the sensor module). Sensing controller power should be off.
(2) Connect the sensor head on the output of the video source.
(3) Connect the video cables as you would normally do.
(4) Turn on the video source output. (i.e. ‘power on’ button on a DVD player)
(5) Verify the SMVID01 LED indicator is ‘on’.
(6) Turn off the video source output. (i.e. ‘power off’ button on a DVD player)
(7) Verify the SMVID01 LED indicator is ‘off’.
(8) If the indicator is not ‘off’, then adjust the sensitivity until the LED just turns off.
(9) Repeat Steps 4 to 8 until both ‘on’ and ‘off’ conditions are satisfied.
