-
1
-
INSTALLATION INSTRUCTIONS
SLLC1
Speaker Level to Line Level Converter
DESCRIPTION
The SLLC1 Speaker Level to Line Level Converter is a simple device that allows the MRC44CTL or
MRAUDIO4X4CTL to be used with an auxiliary amplifier.
The SLLC1 is connected to the amplifier (zone audio) output on the multi-room system. The SLLC1
then converts the amplifier output signal to a line-level output signal. The line-level output signal can
now be connected to the pre-amplifier input on an auxiliary amplifier.
The benefit of using an auxiliary amplifier is that it allows the multi-room system to expand in areas
such as indoor pools, large outdoor areas, or even long hallways.
SPECIFICATIONS
Mounting flanges. No double sided tape needed.
1:11 signal amplitude conversion ratio.
o
The SLLC1 is designed to take a 25 Watt system and convert the speaker output to a
typical line level signal.
o
The SLLC1 should not be connected to a speaker output that can provide greater than
35 Watts per channel output.
4-Pin screw terminal connector. Use 3 feet of speaker wire, size 12AWG or 14AWG.
Requires stereo RCA cables. For optimal performance, cable should not exceed 6 feet.
No power supply required.
