12950 Bradley Avenue
y
Sylmar CA 91342-3829
y
Phone
(818) 362-0353
y
Fax
(818) 362-9506
2.
Select the
MRC88
Pulldown from the menu bar. Select
Cold Firmware Upgrade
. Then
click on
Start
in the Firmware Upgrade section.
3.
A popup window titled
Select Firmware Upgrade File
will open allowing you to select
the firmware file to be loaded into the MRC88 Controller/Amplifier. (If the proper
directory is not displayed, click on the “Look In” drop-down list and go to the Program
Files\DragMRC\Firmware directory.
4.
Follow the on-line instructions for completing the procedure.
NOTE:
After this is complete you will need to do a Base Unit Transfer to load your project
back into the unit.
For more information, please contact the Xantech technical support department at:
phone:
800.843.5465 x 812
or
email:
02-19-2003
