Model MRC44
Page: 11
© 2002 Xantech Corporation
26. Source 2 Selector.
Selects source input 2, reverses source icon on LCD Display when source is selected
and sends IR commands programmed to this button (if any) to the source 2 and common emitter outputs.
Also used in Dynamic Monitor Lockout and Dynamic Zone Link Modes.
27. Source 3 Selector.
Selects source input 3, reverses source icon on LCD Display when source is selected
and sends IR commands programmed to this button (if any) to the source 3 and common emitter outputs.
Also used in Dynamic Monitor Lockout and Dynamic Zone Link Modes.
28. Source 4 Selector.
Selects source input 4, reverses source icon on LCD Display when source is selected
and sends IR commands programmed to this button (if any) to the source 4 and common emitter outputs.
Also used in Dynamic Monitor Lockout and Dynamic Zone Link Modes.
29. Vol
+
. Increases zone volume and moves the Volume Bar on the LCD Display to indicate volume level
(non-programmable).
30. Vol
-
.
Decreases zone volume and moves the Volume Bar on the LCD Display to indicate volume level
(non-programmable).
31. Mute.
Mutes zone speaker output. Sends IR commands programmed to this button (if any) to the selected
source and common emitter outputs.
32. CH
+
.
Sends IR commands programmed to this button to the selected source and common emitter outputs.
33. CH
-
.
Sends IR commands programmed to this button to the selected source and common emitter outputs.
34. Status.
Displays zone and system status (zone/source activity, linked zones, audio setup, etc – non-
programmable).
35. Select/Play, Stop, Pause, Rew, FF.
Each
send IR commands programmed to these buttons to the
selected source and common emitter outputs.
43
37
36
41
42
39
38
40
43
Figure 5 – The Model MRC44 Keypad – Rear Panel Features and Functions