6
ITEM C: (4) 283D Designer Emitters
ITEM D: (1) 781ERGPS Power Supply
STEP 1:
Plug in the 2.1mm Coaxial power plug of the 781ERGPS Power Supply (
ITEM
D
) into the jack labeled 12VDC on the 789-44 Connecting Block (
ITEM B
).
Plug the AC end of the 781ERGPS Power Supply (
ITEM D
) into a ‘un-
switched’ 120V AC Line outlet.
STEP 2:
Connect the 3.5mm stereo mini plug from the 481D IR Receiver (
ITEM A
) to
the ‘IR RCVR’ input located on the 789-44 Connecting Block (
ITEM B
).
The
RED
connector connects to the
RED
receptacle.
7
STEP 3:
Plug in the 283D Designer Emitters 3.5mm mono mini plug (
ITEM C
) into the
jacks labeled EMITTERS on the 789-44 (
ITEM B
) and affix the opposite end
to the IR Sensor Window of the controlled equipment. Extra double sided
adhesive tape is included.
The
YELLOW
connector connects to the
YELLOW
receptacle.
