Xantech HDMIEXTEND, User Manual

Page: 3 / 9

- 3 -
INSTRUCTIONS
1) Connect your display to the HDMIEXTEND receiver unit
2) Connect your source to the HDMIEXTEND transmitter unit
3) Connect your CAT-5 cables between the transmitter and the receiver
4) Plug the 5V power supply into the HDMIEXTEND transmitter and receiver unit
You should now have picture. If you do not see a picture, try unplugging and replugging the HDMI
input on the HDMI sender unit. Make sure your CAT-5 cables are not crossover type and have been
properly crimped and tested. Cycle the power on the unit.
* If problems persist try adjusting the Dip Switches by following the Dip Switch Usage Guide.