![background image](http://html1.mh-extra.com/html/xantech/dpc100/dpc100_installation-instructions-manual_3160187004.webp)
08905106B
-
4
-
OPERATION
A. Paging
To page throughout the house/small business, simply press
#
, then
7
(the letter “
P
” key on your
keypad). Speak into the phone receiver and your voice will be heard throughout the house or small
business over the speakers. If background music is present over the speakers, it will automatically
mute allowing your page to be heard. If you have a caller on the phone, they will automatically be
put on hold. You can get the caller back by simply pressing
#8
or by momentarily hanging up.
Note:
The PAGE LED will light during paging.
B. Placing a Call On Hold
To place a call on hold, simply press
#
then
6
(the letter “
O
” key on your keypad), two beeps should
be heard confirming the call is on hold, then hang up. The call can then be taken on another phone
elsewhere in your home or small business. Optional Music-On-Hold can be provided.
C. Releasing a Call On Hold
If you hang up the phone after placing a call on hold, simply coming off-hook with any phone will
return you to the caller on hold. If you have placed a caller on hold (
#6
) or have announced a page
(
#7
) and have remained off-hook, enter
#8
or momentarily hang up to return to the caller on hold.
If the caller hangs up while on hold, the
DPC100
can sense a CPC disconnect signal and will
automaitcally release the line.
Note: The DPC100 has a maximum on-hold call time of 1 hour. After a
caller has been on hold for 1 hour, the DPC100 will automatically disconnect the call.
D. On-Hold Alarm Tones
The
DPC100
can provide on-hold alarm tones to alert you that a caller has been left on hold. After
each minute the call has been left on hold, the
DPC100
will momentarily mute the background music
and output a double beep tone over the speakers. This feature can be disabled by setting DIP switch
1
to
OFF
(see
DIP Switch Programming
page 2).
E. Phone to Phone Intercom
This feature allows you to first page someone over the speakers, then speak with them over the
phone without the conversation being heard over the speakers. To perform this function, simply press
#
, then
7
(the “
P
” key on your keypad), announce your page, then press the numeric
0
key. Another
phone coming off-hook will be instantly connected.
F. System Bypass
The system bypass allows you to use outside phone services (automated attendants, etc.) that
require the use of the
#
key. Come off hook with any phone and enter
#9
, two confirmation beeps
should be heard, hang up the phone. The
DPC100
will now ignore all Touch Tone commands on the
next off-hook.
G. Music Mute
To mute the background music any time you are on the phone, simply enter
#5
. The background
music will return when you enter
#5
again or hang-up the phone. The
MUTE
LED will light while the
background music is muted.
Note: The music mute command (#5) should not be used in multi-line
applications.
Summary of Contents for DPC100
Page 3: ...08905106B 3 APPLICATION...