IR Receivers
3
172-78
INSTALLING THE XTRA LINK 284M DUAL IR EMITTER
Plug the 284M Dual IR Emitter into the jack marked "EMITTER" on the CPL77 Coupler in the Main Room.
The 284-10 emitters should be installed directly to the infrared sensor "window" on the
front panel
of the
satellite receiver, VCR, cable box, etc. Simply remove the paper backing exposing the adhesive surface
of each emitter and apply them to the center of the sensor window.
NOTE:
Although the 284M appears dark to the eye, it is transparent to infrared. Positioning the 284M
directly over the infrared window(s) of the component(s) will not block direct IR control from a handheld
remote.
OPERATION
To use the Xtra Link Remote Control Extension System, simply point your handheld remote control(s) at
the 291-00 IR Receiver and press the desired button. A red LED on the front of the 291-00 will indicate the
reception of your infrared command.
NOTE:
The maximum usable distance between your IR remote and the 291-00 Receiver will vary for each
remote and might be shorter than when directly used in the room containing the satellite receiver or other
IR controlled devices.
The 172-78 system may be left on continuously as it does not affect the normal operation of the remote
controlled device(s) and consumes very little energy.
T
O
TV
Satellite Dish
TV SIGNAL PATH
IR REMOTE CONTROL PATH
Hand Held
Remote
REMOTE
ROOM
RF
IN
284M
Dual Mouse
Emitter Assembly
(included)
MAIN ROOM
CPL77 COUPLER
(included)
Room-to-Room Coaxial Cable
(not included)
Coaxial Cable
(not included)
Place emitters on
the IR sensor
window on
front
panel
of each
controlled unit.
Emitter
RF IN
OUT TO TV
SATELLITE
RECEIVER
(Back Panel)
RF IN
VCR
(Back Panel)
Emitter
IR Sensor Windows
(Front Panel)
Coaxial Cable
(not included)
INJ77 INJECTOR
(included)
291-00
IR RECEIVER
(included)
2ND
TV
1ST
TV
RF IN
Coaxial Cable
(not included)
REMOTE
TV
EMITTER
LOCAL TV
CPL77 COUPLER
SA
T/VCR
Front View
Side View
OUT TO TV
IR RECEIVER
INJ77 INJECTOR
ANT INPUT
+12 V
Front View
Side View
RF SPLITTER
2-Way
DC Passing
(Xantech # 04027500
not Included)
Room-to-Room
Coaxial Cable
(not included)
T
O
TV
REMOTE
ROOM
RF
IN
To 220 V AC
(unswitched)
3RD
TV
IR RECEIVER
INJ77 INJECTOR
ANT INPUT
+12 V
Front View
Side View
Coaxial Cable
(not included)
Hand Held
Remote
781C78
Power Supply (included)
291-00
IR RECEIVER
(included)
781C78
Power Supply (included)
To 220 V AC
(unswitched)
INJ77 INJECTOR
(included)
Fig. 3
Advanced Multiroom Hookup