19
This section is the installation
instructions for Windows NT/2000/XP
only.
IP Address Configuration
When using the IP Address interface,
use the keys on the front panel to set the
address as follows:
•
Reset
key increases the current
number flashing by one.
•
Menu
key moves to the next
number to the right of the
current number flashing.
Installation - Windows NT/2000/XP
•
Test
key moves to the next
number to the left of the current
number flashing.
•
Enter
key accepts new address (if
valid) and returns to I/F:IP
Address menu. The menu will
display a message if the address
entered is invalid.
Note
:
You must turn off the printer
and restart it for the new IP
address to take effect.
Fig. 73 Click Install Printer.
Fig. 74 Make Appropriate Selections. Click OK.
Fig. 75 Enter IP Address (Network Installation
only).
Fig. 76 Read Setup Information. Click Yes.
Summary of Contents for ColourLaser series guide
Page 1: ...100 100621...
