CLEAN AND STORAGE
48
of the vehicle to prevent damage.
Dry the plastic parts then wipe with a
soft, dry cloth or sponge.
• Protect particularly plastic parts,
paint, headlight glass from harsh
chemicals such as fuel, rust remover,
brake cleaner or similar. The use of
such agents may result in malfunc-
tion, damage and affect the security
itself.
• Do not use a high pressure washer
or steam cleaner, causing water
in storage can penetrate electrical
components such as connectors or
switches, lighting, ventilation hoses,
brake shoes and brake linings or
damage, seals, paint and other sur-
faces.
Cleaning after normal use
Remove dirt with warm water, a mild de-
tergent, and a soft, clean sponge, and
then rinse thoroughly with clean wa-
ter. Use a toothbrush or bottlebrush for
hard-to-reach areas.
CLEAN THE VEHICLE
Clean of the vehicle in proper and sui-
table way will make it attractive, extend
it’s lfe and optimize the performance.
Before cleaning
1. Cover the muffler outlet with a plas-
tic bag to prevent water to come . in-
side. Please do it only after the
2. Closed every caps, covers, electri-
cal connectors that are well install
and water can be avoid to get into,
while you do the clean job.
CAUTION
• Do not use acid-based cleaners. If
such funds used for stubborn stains,
so use this only occasionally, dry it
immediately after and then apply a
corrosion protection spray.
• Always follow the manufacturer‘s
instructions on care and cleaning
agents.
• Use best only water and mild de-
tergent or special cleaner from the
dealer to the sensitive components
Cleaning after riding in the rain,
near the sea or on salt-sprayed
roads
CAUTION
Since sea salt or salt sprayed on the
roads during winter are extremely cor-
rosive in combination with water, carry
out the following steps after each ride.
• Wait until the engine / exhaust have
cooled.
• Clean the vehicle with warm water
and a mild detergent.
• Do not use hot water, which increa-
ses the corrosive effect of the salt.
• Apply a corrosion protection spray
on all metal, including chrome- and
nickel-plated, surfaces to prevent
corrosion.
After cleaning
• Dry the vehicle.
• To prevent rust, we recommend ap-
propriate care to use according to
manufacturer‘s instructions.
• Wax all painted surfaces.
