Xanboo Shell HomeGenie XWC700 User Manual Download Page 3

I

2

PRODUCT DESCRIPTION ///

The Shell HomeGenie

 

Wireless Camera

 is a 2.4 GHz wireless camera with motion detection. 

PACKAGE CONTENTS ///

(1) Shell HomeGenie

™ 

Wireless Camera 

(1) 9V Power Supply

(1) Wall Mounting Kit

WALL MOUNTING ///

NOTE:

 

Be aware of the length of the power adapter cord before selecting a mounting position.

1. Using the holes on the drilling template on the back page of the manual, mark the position 

of the holes to be drilled. For drywall or other composite surfaces use a a 7/32” drill bit. 
Drill a hole for each of the mounting screws and insert a plastic wall plug into each hole.  

2. Using the screws provided, secure the camera to the wall.

3. Position the camera to view the desired area and plug in the power supply.

Please keep in mind that the field of view is 80 degrees and motion sensor 
distance is up to 30 feet.

4. Any slight adjustments can now be made to the camera viewing angle by 

tilting and panning the camera head with your hand.

5. It is recommended that the antenna be set fully vertical. 

TABLETOP MOUNTING ///

Alternatively the camera may be placed on a level surface.

1. Plug in the power supply

2. Any slight adjustments can now be made to the camera viewing 

angle by tilting and panning the camera mirror with your hand.

3. Adjust the antenna as needed. It is recommended that the antenna stay 

at a 90-degree angle to the base of the camera for the best picture quality.

TECHNICAL SPECS ///

High resolution color video camera with motion detection

All hardware for either wall or ceiling mounting included

AC or battery operation (batteries not included)

Auto Brightness, Auto Contrast, Auto White-Balance

TV System: 

NTSC or PAL (color) standard

Integrated Lens: 

4.3 mm, F2.0 fixed focus

Motion and camera lens:

80 degree field of view

 

Focus range:

2’ - Infinity 

Resolution: 

360 horizontal TV lines

Signal/Noise Ratio: 

48 dB

Image Sensor: 

1/3” CMOS

Frequency Range: 

2.41 - 2.47GHz 

High Speed Electronic Shutter: 

1/60 - 1/15,000 sec 

Modulation: 

FM

Min Illumination: 

3 lux

Current Consumption: 

approx. 220mA

Channel Selection: 

Electronic tuning with PLL

RX Sensitiivity:

-102 dBm

Typical free range space:

200 feet

Typical indoor range:

60 feet

APPROVALS ///

FCC ID NUMBER: OU4-XWC700 / IC: 4576A

STANDARDS

93/68/EEC, 89/336/EEC, BS EN 50082-1:1992, 73/23/EEC, EN60950:1992 CE

INSTRUCTIONS TO THE USER:

The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's 

authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that interferences will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off 

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
CE directive  93/68/EEC,  EMC directive 89/336/EEC, LV directive 73/23/EEC.

This class B digital apparatus complies with Canadian ICES-003.
The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any 

interference, including interference that may cause undesired operation of the device.

WALL MOUNTED

DESK/TABLETOP MOUNTING

SHELL HOMEGENIE WIRELESS CAMERA

9V CAMERA ADAPTER

WALL MOUNTING KIT

Reviews: