background image

安全注意事项

X650 Pro

在给您带来快乐飞行体验的同时也潜藏着一定的危险。

X650 Pro

在飞行时具有一定的飞行

速度,且螺旋桨转速高达

4000RPM

以上,具有极大的破坏力。无论您是初学者还是经验丰富的玩

家,安全意识都应该铭记于心!

1. 

熟悉飞行环境,远离障碍物及人群,并确认是否存在不安全因素,如高压线、汽车、人群等。

2. 

勿疲劳、酒后或精神不佳时飞行,以免发生意外。

3.

远离潮湿环境,切勿大风天气或雨天飞行,否则将造成电子设备故障发生危险。

4. 

远离热源,以免造成电子设备或其它部件的损坏。

5. 

初学阶段不要独自飞行。建议飞行之前先向有经验的飞行员获取帮助。

6. 

准备救援工具,如手机、对讲机。

7. 

请在安全起飞重量下飞行,切勿过载运行机器,以免发生危险。

8. 

飞行前必须检查设备是否正常,是否存在同频干扰。

9. 

远离运转中的机器,切勿用身体接触旋转中的电机或螺旋桨,更不要用手抓。飞行时切勿穿宽

松衣服以免与遥控器或螺旋桨发生牵扯造成意外。

10. 

在飞行前始终把遥控器油门杆保持在最低点。

11. 

建议在无桨状态下试运行

X650 Pro

,检查遥控设备和电机的工作是否正常,一切正常之后再

安装螺旋桨,以免造成安全事故。

12. 

请使用

XAircraft

提供的零件,用户使用其它来源的零件或改装本产品需独立承担相应的飞行

责任。

SAFETY CAUTIONS

X650 Pro gives users an enjoyable fly experience but is potentially dangerous at the same time. 

The blades rotate up to 4000RPM which can cause serious injuries or property damage. Safety 

awareness should be firmly followed by all users regardless of flying experience.

1. Familiarize yourself with fly environment and any obstacles. Identify any potential hazards 

such as power lines, cars, people, etc. 

2. Do not fly the aircraft when fatigued, drunk or your mental state has been compromised 

which may cause an accident.

3. Stay away from wet areas. Do not fly in the rain or wet environments which can cause 

device failure and probably lead to danger. Do not fly at night or in windy conditions.

4. Stay away from any fire resulting in damage of the electronic parts or others such as the 

flight battery.

5. Do not fly alone during your preliminary flights. If you need help, please enlist the aid of an 

experienced pilot before flying for the first time.

6. Prepare rescue tools such as cell phones or other communication devices which should 

you need to call for help.

7. Please fly under safe take-off weight, do not overload the aircraft which can lead to danger.

8. Ensure all the equipment operates correctly before flight and that there is no transmitter 

interference or conflicts.

9. Do not touch any moving or powered parts. Do not try to catch the quadcopter which has 

rotating motors or blades for example. Keep loose clothing away from moving parts as they 

may get caught and could cause physical harm.

10. Always throttle down to minimum before fly.

11. Remove the propellers when testing the remote device or motors operation. Attach the 

propellers after you have tested that everything is working good to prevent an accident.

12. Assemble the aircraft with accessories XAircraft provides. XAircraft is not responsible for 

any consequence resulted from assembly with other accessories or modifications.

免责声明

1

. 请在当地法律法规允许的范围内使用本产品,

XAircraft

不承担因任何非法使用导致的法律责任。

2

. 本产品属于遥控航模,请严格遵守航模产品的安全操作规范,

XAircraft

不承担因任何操作和使用

控制上导致的任何性能、安全与法律责任。

3

. 航模不是玩具,请在专业人员指导下飞行,并按本说明书安装和使用本产品,

XAircraft

不对因用

户安装、配置、操作等导致的航模事故负责。

DISCLAIMER

1. Using XAirctaft products within the limits permitted by local laws and regulations. XAircraft 

is not responsible for any illegal activities.

2. The X650 Pro is an aeromodelling product only. Please strictly follow the aeromodelling 

safe function rules, XAircraft does not hold responsible for any control over its operation or 

usage. 

3. Model aircraft are not toys! Fly under professional guidance and strictly follow instruction 

rules in this document. XAircraft is not responsible for consequences caused by improper 

install, wrong setting or operation.

1

Summary of Contents for X650 PRO














Reviews: