The module is intended for OEM installation only.
The intended use is generally not for the general
public.
It is generally for industry/commercial use.
The connector is within the transmitter enclosure and can only be accessed by disassembly of the
transmitter that is not normally required. the user has no access to the connector.
Installation must be controlled. Installation requires special training
Notice to OEM integrator Must use the device only in host devices that meet the FCC/ISED RF exposure
category of mobile, which means the device is installed and used at distances of at least 20cm from persons.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The end user manual shall include FCC Part 15 compliance statements related to the transmitter as show
in this manual. (FCC
Statement). Host manufacturer is responsible for compliance of the host system with
module installed with all other applicable requirements for the system such as Part 15 B.
The devices must be installed and used in strict accordance with the manufacturer’s instruction as
described in the user documentation that comes with the product.
Any company of the host device which install this modular should perform the test of radiated &
condicted emission and spurious emission etc. according to FCC Part 15C: 15.247 and 15.209 & 15.207,
15B class B requirement, only if the test result comply with FCC part 15C: 15.247 and 15.209 & 15.207, 15B
class B requirement. Then the host can be sold legally.
This modular transmitter is only FCC authorized for the specific rule parts 47CFR Part 15C (15.247, DTS)
listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC
rules that apply to the host not covered by the modular transmitter grant of certification.
This module is stand-alone modular. If the end product will involve the Multiple simultaneously
transmitting condition or different operational conditions for a stand-alone modular transmitter in a host,
host manufacturer have to consult with module manufacturer for the installation method in end system.
Summary of Contents for WM101
Page 3: ...3 4 IO...
