XAG P100 Pro, Pilot Operating Handbook

Page: 48 / 184

XAG AUSTRALIA 48
Using the Remote Controller
Inserting SIM Card
ARC3 Pro RTK Module
ℹ
IMPORTANT
Before inserting the SIM Card, please ensure the remote controller is turn OFF.
The remote controller may already have an eSIM card (embedded SIM card) in the SIM2 card slot
from the factory, as per service provider requirements. If you notice that the SIM2 card slot is sealed,
DO NOT remove the seal or insert any other SIM cards or foreign objects into this slot. Violating this
warning could result in damage to the remote controller, for which you would be held responsible.
⚠ WARNING
01. Locate the USB-C cover located at the top of the Remote Controller. Carefully open it to reveal
the USB-C port, ensuring not to apply excess force that might damage the cover or the port.
02. Once the USB-C port is exposed, take the RTK Module and gently insert it into the port. Ensure
it's properly connected and fully seated in the port.
📖
INSTRUCTION
01. Carefully unplug the rubber plug of the SIM1 Slot.
02. Insert the nano-SIM card into the slot, ensuring it is aligned correctly with the SIM slot's
orientation.
03. Once the SIM card is properly inserted, close and secure the rubber plug. This will protect the
SIM card and the slot from any potential damage.
ℹ
IMPORTANT
Your ARC3 Pro RTK Module is now ready for use. Always remember to handle the module and the
remote controller with care to prevent any damage. And always double-check to make sure your RTK
Module is securely attached before starting your drone operations.