121
XAG AUSTRALIA
XAG V40 / P40 / P100 Agricultural RPA features Multiple aircraft control functions, which can
coordinate the operation of up to two aircraft simultaneously, enabling pilots to enhance their
efficiency for multi-field or broad acreage.
Swarm Operation Mode
01. Set aircraft as Operation device (up to two).
02. Rename and ensure each RPA have its unique identification.
03. After setting the corresponding aircraft as an operation device, close the device menu and
confirm the aircrafts are listed on the footer of the App.
Tap on the status box of the corresponding aircraft at the footer of the APP to switch between the
aircraft. After switching the Aircraft, the APP will display the selected Aircraft Name at the Aircraft
status Bar.
Switch Control
🧷
IMPORTANT
Operation with Multiple Aircraft
√
Inspect and ensure the Take-off and Landing Location must be chosen separately for each RPA
so there will be no conflict for the aircraft during the flight.
√
Inspect and ensure the Outbound, and RTH height should have a minimum of 1m separation.
√
Ensure the obstacle avoidance is enabled to assist the aircraft in maximising the safety of the
Aircrafts.
√
DO NOT overlap the Take-off, Landing location, inbound, outbound and flight route.
√
Plan and prepare actions in the event of abnormal or emergencies.
√
Plan and allow for time separation between Take-offs.
√
Maintain a minimum safe distance of 10m between Aircraft in operations.
√
Sensitivity of the radar module may be reduced when operating multiple aircraft within a short
distance.
