1. Installing the battery will automatically turn-on the unit and proceeds to Watch Mode.
2. Enter to COMMUNICATOR Mode by pressing and holding the
Power
key for around 3 seconds. To exit
COMMUNICATOR Mode, press the
Power
key for around 3 seconds while on COMMUNICATOR mode.
2. Check the battery condition on the display.
3. Adjust the volume to a comfortable level by pressing the
UP
or
DOWN
key (default).
Navigating through the Menu
To access the advance feature of the KP4X, your COMMUNICATOR has a Menu two (2) function:
Watch Mode (Default)
COMMUNICATOR Mode
WATCH Mode
1. Your COMMUNICATOR will automatically go to Watch Mode once the battery is installed, only the watch segments and
icons will be displayed on the LCD during this mode. Press the
Menu
key briefly to enter the Time Setting Mode; a
short keybeep tone will be locally generated when the Time Setting mode is engaged.
2. Additional presses of the
Menu
key for no longer than 1 second will advance you through the menu until exiting to
Watch mode. A short keybeep tone is generated at each key press
3. Menu mode exits to standby mode when the
Menu
key is pressed while the final menu selection is active.
4. The unit automatically times out of Menu mode and enters Watch mode in 10 seconds.
COMMUNICATOR MODE
1. To enter or exit to COMMUNICATOR Mode, press the
Power
key for around 3 seconds. A long keybeep tone is locally
generated (after a short keybeep tone) when the unit goes into COMMUNICATOR Mode and the LCD will display the
segments and icons for the COMMUNICATOR.
2. To enter the Menu Mode, press the
Menu
key briefly. A keybeep will be locally generated when the Menu Mode is
engaged.
3. Additional presses of the
Menu
key for no longer than 1 second will advance you through the menu until exiting to
COMMUNICATOR mode. A short keybeep tone is generated at each key press.
4. Menu mode exits to standby mode when the
Menu
key is pressed while the final menu selection is active.
5. Menu mode will automatically time out to standby mode 10 seconds after the last user programming is pressed.
6. Menu mode can be autoamtically cancelled by pressing
PTT/Call
key.
To set the Time
Your KP4X COMMUNICATOR has a 12-hour (AM/PM) Time Clock, which can be set as follows:
1. In Watch mode, enter to
Menu
mode by pressing the
Menu
key briefly until a short keybeep tone is heard. When the
Setting mode is engaged, the
Hour
segment in the LCD Display will flash.
2. Press the
Up
or
Down
key to increase or decrease the
Hour
number displayed, a short keybeep tone is generated at
each key press. The Time Setting will cycle within 12hour am and 12hour pm. To engage auto-repeat, press and hold
the
Up
or
Down
key.
3. Advance thru the Menu by pressing the
Menu
key briefly until the
Minutes
segment is flashing. A short keybeep tone
w ill be generated.
4. Press the
Up
or
Down
key to increase or decrease the
Minutes
number displayed. A short keybeep tone is generated
at each key press. To engage auto-repeat, press and hold the
Up
or
Down
key.
5. Exit the
Menu
mode to return to “normal” mode by pressing the
Menu
key briefly or by automatic time out for about 10
seconds after last key is pressed.
USING THE COMMUNICATOR
Channel
Hours (Watch)
Minutes (Watch)
Menu
1~14
12hr am/ 12hr pm
0~59
VOX
Menu
On/Off
