6. USING THE KEY PAD
After inserting the chip card, press the numeric keys of virtual keypad (
Figure 5, as
reference)
shown on the display to enter the password. Press Cancel (X) key to
terminate any current function and press the Enter (O) key to confirm a value or an
option.
Figure 5
7.
USING THE CONTACTLESS CARD READER
Tap the contactless card on top of the contactless logo which is shown on the paper
cover. The 4 green LED indicates the contactless card reading status.(
Figure 6
).
Figure 6
8. CHANGE THE BATTERY
STEP 1
: Remove the 2 screws and open the battery cover as
Figure 7
.
STEP 2
: Lift the battery and pull up the battery connector from device as
Figure 8
STEP 3
: Insert the connector of new battery into the device as
Figure 8
Note: Please ensure the orientation of connector of battery cable matches the connector on
the device.
STEP 4
: Place the new battery into the compartment