FRONT AREA
1
Printer Paper Cover
2
5” Display
3
Magnetic Strip Reader (MSR) slot
4
Smart Card Reader (SCR) slot
LEFT AREA
5
Power Button (Press > 3 seconds to power on/off)
6
Audio Jack
REAR AREA
7
Charging contact points
8
USB port (type C) for charging
9
Camera for 1D/2D barcode scanning (Optional)
10
Battery Compartment
■
AT-150 Power spec:
Input: 5V DC, 3A
■
Power Adapter spec:
Input: 100 ~240 Vac
Output: 5V DC, 3A
Caution:
Use only the AC adapter approved and provided by XAC Automation
Corporation for use with this device. Use of any other AC adapter may cause a risk of
fire or explosion.
Operating Temperature: 0
o
C to 40
o
C
3.
P
OWER
O
N
/O
FF THE
D
EVICE
To power on the device: Long press the Power button
(Figure 2)
> 3 seconds and the
device screen will be activated.
To power off the device: Press the Power button > 3 seconds to shut down the device.
Figure 2
NOTE:
When device is in idle or suspend mode, short press power button will wake up the
device.
Power Button
