X4-TECH IR-1200 Instruction Manual Download Page 4

6

7

Chapter 2

   Safety information

Chapter 2

   Safety information

Dear Customer:

The following safety and hazard warnings are not only for the protection of your device, but also 
serve as a protection against potential health hazards. Please take time to read the following 
instructions carefully. 

We assume no liability for personal or property damage resulting from the failure 
to comply with the safety instructions, improper operation and handling. Under 
such circumstances, all claims under warranty will become void.

›  For safety and licensing (CE) reasons any unauthorized modifi cation and/or change 
on the device is prohibited and will void the warranty and all warranty claims.

› Any persons operating, installing, setting up, or servicing this device must be trained 
and qualifi ed accordingly and observe these operating instructions.

› Ensure that the device has been set up accordingly by following all instructions 
found in the instruction manual. 

›  This is a protection class II device. Make sure that the voltage supply of the power 
outlet used meets the required voltage specifi cations (230 V~/50 Hz).

› Power supply cables should be routed so that they are not likely to be walked on, 
squished or pinched by items placed upon or against them, paying particular attenti-
on to cords at plugs, convenience receptacles, and the point at which they exit from 
the device. Avoid exposing the cable to extreme heat or cold.  Ignoring the above 
mentioned could result in cable damage and present the dangerous risk of electric 
shock.

› Should any evident damage be seen on the device or on the connection cables, do 
not come in contact with or touch these.   Switch off  the corresponding circuit brea-
ker in the power distribution panel fi rst, before carefully unplugging the power plug 
from the wall outlet. Do not operate this device further! Please contact or take it to a 
qualifi ed service technician/specialty workshop. 

› In order to completely cut off  the power supply to the device, unplug the power 
plug from the wall outlet. Merely turning the device off  with the ON/OFF button is not 
suffi

  cient enough. Make sure that receptacles are easily accessible. 

2

Safety information

› Always pull on the plug’s grips and never on the cable to remove from a wall outlet. 

› Unplug the device from the power outlet, if it is not in use for a longer period of time.

› For safety reasons, always unplug the device from the power outlet during thunder-
storms. 

› Eliminate potential tripping hazards by routing cables in such a way that no one can 
trip or stumble over them. 

› Never use the device, if the power cable or device is damaged.

This device is not a toy and not suitable for children. 

Small children are unaware of the serious and immediate dangers involved 
when exposing themselves to or handling electronic devices. Furthermore, 
this product contains small parts that could be swallowed.

› Keep packaging and protective foil away from children at all times to a void the dan-
ger of suff ocation.

› The device should never come in contact with water or moisture.

› To prevent the risk of fi re or electric shock make sure that liquids, such as dripping or 
splashing water, rain or moisture, do not come in contact with the device and power 
supply plug

› Operate this device in a moderate climate and never expose it to extreme tempera-
tures, such as high humidity. 

›  Condensation can build up suddenly, when this device is brought from a colder 
into a warmer area (e.g. when transporting).  Should this happen, allow the device to 
warm up to room temperature fi rst before using.

› Care should be taken that liquids do not come in contact with the interior, this is 
why containers containing liquids, e.g. bucket, vase or plants should never be placed 
anywhere near this product, power supply plug inclusive. This could not only damage 
the device, but also present a fi re hazard.  

› It is imperative to avoid contact with moisture, e.g. in the bathroom.

Summary of Contents for IR-1200




















Reviews: