21
»
Remove the protection foil from inside the battery compart-
ment of the remote control.
»
The light set is now ready for use.
The lamps can be controlled via the remote control or by
direct push on the illuminated area.
Remote Control:
»
Press 1: The lamps are on.
»
Press 3: The respective color will be activated.
»
Press 4: A slow color changing mode is activated.
»
Press 5: A fast color changing mode is activated.
»
Press 6: The lamps will be set on default. The lights switch
to red.
»
Press 7: The brightness is decreased.
»
Press 8: The brightness is increased.
»
Press 2: The lamps are off.
Push Control:
»
With each press on the illuminated area a different color is
activated.
»
Press the illuminated area repeatedly to pick the desired
color.
»
Press the illuminated area for about 5 seconds to switch off
the lamps.
Summary of Contents for 701753
Page 2: ...2 A B C 1 2 3 4 7 5 8 6 B D...
Page 59: ...59...