36
Use the same hex screw and
washer to fix the holder of the
floodlight to the stake. Be aware
that you fix it enough so the
floodlight will not shake.
Stake the construction into the
ground at your chosen position.
To gain an optimal result of
the lighting effect it might be
possible that you have to change
the position several times.
• You can position the projection by loosening the screws of the holder and screw
them tight after you positioned the lighting effect. Alternatively, you can use the
floodlight without the stake and use the mounting to attach the device directly
to a wall.
• Connect the 3 cable tails of the floodlight to a terminal (not included). Connect
the 3 cable tails of your household electric power supply with the opposing
wires. Make sure that the cables are connected correctly:
