13
Keychain Remote
Press LIGHTS ON or LIGHTS OFF to
turn on or off Lamp Modules set to A-1
(or other codes on request from ORCA
Monitoring Services - see pages 10 and
11).
Turning lights on/off from the
Console
Press LIGHTS ON or LIGHTS OFF on
the Console to turn on or off X-10
Modules set to A-1 (or other codes on
request from ORCA Monitoring
Services - see pages 10 and 11).
TURNING LIGHTS ON AND OFF
Panic Button
Press the small left hand (House) button
under the lid on the KR15A Panic Button
to turn on lights connected to modules
set to A1. Press the right hand (Unit)
button to turn off the same modules.
To change the House/Unit Code
for the KR15A:
The KR15A will normally control
modules set to A-1. To change this:
Press and hold the Unit button (under
the battery compartment lid) until the
red light blinks twice, then release
and press the button the desired
number of times for the Unit Code
you want (once for Unit Code 1, twice
for Unit Code 2, etc.). The light blinks
each time you press, and confirms
your entry by blinking about 2 sec-
onds after your last press. Use the
same procedure to change the
Housecode (pressing the House
button instead). One press for
Housecode A, two presses for B, etc.
To confirm the code you've set: press
the House or Unit code button - the
light blinks back the appropriate
number of times for the code that is
set.
