background image

42

43

 Advanced 

Settings

Press these keys using the following 
sequence: 

HOME, Setup

More

, and 

Advanced

The screen to the right lets you change 
the backlight delay; enter codes for 
devices directly from the printed code 
list that came with the remote; set up 
punchthrough for various devices; and 
limit the channels that young children can 
access.

Options

Select Options, then press a Side Key to 
the left or the right of the option to adjust 
the setting. Then press OK. 

Backlight adjusts how long it takes before 
the screen goes black (approx.. 2 to 120 
seconds) if you don’t press any keys. 
Key Transmit Time changes the delay between digits when 
sending favorites, e.g., 1–6–2. This can be used in situations 
where the channels are not accepted by the set-top box.

Device Codes

Select Device Codes, and then select a 
device. Devices that have not yet been set 
up are grayed out. You can select them 
here and set them up by entering the device 
code from the printed code list. Or, you 
can change the code for a device that had 
already been set up by simply entering the 
new code. 

This screen also lets you view the codes for any device that has 
been set up. In the above example you can see the codes that 
are set for TV, Cable, and SAT. We’ve selected CD and can 
then enter its 4 digit code from the code list, using the number 
keys on the remote. The above also shows that we’ve learned 
codes under the AUX 1 key in DVD mode.

  Setting up more, cont.

Clearing Settings in the Remote

This feature lets you clear (erase) various 
things you’ve set up in the remote. 

Press these keys using the following 
sequence: 

HOME, Setup

More

, and 

Advanced

. Then at the screen to the right 

select 

Clear Settings

.

Pressing the Side Key next to Devices 
lets you clear the settings, i.e., codes for 
various Devices (TV, VCR, etc.). After 
selecting Devices, you select the device 
you want to clear. Only devices that you 
have set up are shown. All other devices 
that have not been set up are grayed out.

Pressing the Side Key next to Favorites lets you select a group, 
e.g., His, Hers, etc., and then clear ALL the favorites you had 
set up in that group of favorites. Only groups that you have set 
up favorites in are shown. All other groups are grayed out.

Pressing the Side Key next to Learned lets you select a device 
(TV, VCR, etc.) that you had previously learned commands 
and/or Macros under and clear everything that was learned. 
Only devices that you have learned commands and/or Macros 
under are shown. All other devices are grayed out.

Pressing the Side Key next to Punchthrough lets you clear any 
Punchthrough commands you had set up for a device. Only 
devices that you have set up Punchthrough for are shown. All 
other devices are grayed out.

Pressing the Side Key next to Master Clear lets you clear 
EVERYTHING in the remote. Be careful when selecting this. 
Note however that ALL the sections above display a warning 
screen allowing you to change your mind before actually 
clearing anything.

Summary of Contents for IconRemote IR34A






























Reviews: