X10 CK11A, Owner'S Manual

Page: 15 / 25

2 9 2 9 2 9 2 9 2 9 2 8 2 8 2 8 2 8 2 8
A A
A A
A
CTIVE CTIVE CTIVE CTIVE CTIVE
H H
H H
H
OME OME OME OME OME
S S
S S
S
OFTW OFTW OFTW OFTW OFTWARE ARE ARE ARE ARE
The ActiveHome software lets you:
• Create a graphical representation of your Modules on your computer screen and then
allows you to control your lights and appliances from your computer.
• Create schedules of timed events that automatically run your home 24 hours a day,
7 days a week.
• Define “Macros” that control groups of Modules. For example, a “Coming Home”
Macro might turn on the porch light, the living room light, and the stereo.
A “Goodnight” Macro might turn off all internal lights, turn off the stereo, but leave the
outside security lights on.
• Define schedules that make your home look lived-in when you’re away, by turning
lights, stereos and other appliances on and off at the times you set.
• Create printed reports showing different aspects of your home automation system such
as what Modules are installed in your home, and what timed events have been set.
C CC
C
C
ONTROLLING ONTROLLING ONTROLLING ONTROLLING ONTROLLING A N A N A N A N A N
IR M IR M
IR M IR M
IR M
INI INI INI INI INI
C C
C C
C
ONTROLLER ONTROLLER ONTROLLER ONTROLLER ONTROLLER
(IR543) (IR543)
(IR543) (IR543)
(IR543)
If you already own an IR Mini Controller, you will need to change the X10 Home
Automation code in the remote to use it. The code for standard X10 Home Automation is
013. The code to control the IR Mini Controller is 014. To change the code:
1 . 1 . 1 . 1 . 1 . Press and hold SETUP
until the LED indicator
lights steadily. Release
the SETUP button.
2 . 2 . 2 . 2 . 2 . Press and release the
X10 button.
3 . 3 . 3 . 3 . 3 . Enter the 014 to control
an IR Mini Controller,
013 for standard X10
control. The LED turns off
after the last digit
entered.
Note: In most cases, you will not need to use the IR Mini Controller to receive commands
from the remote - the Transceiver Module does this for you and has the added advantage
of working through walls. You can’t control the IR Mini Controller and the Transceiver
Module at the same time.