- 7 -
FEATURES
AUTO COOL DOWN AND STANDBY MODE
When the hot air gun is placed in the holder, the hot air gun will go
into Auto Cool Down and Standby mode immediately. The display
will show the temperature as it cools down. Once it has cooled
down, the display will show “---” for both temperature and air flow
indicating it is now safe to shut the unit off.
Note:
The unit will NOT go into standby mode unless the hot air gun is
in the holder.
TEMPERATURE CONVERSION
1.
Press and hold both ▲ and ▼ buttons.
2. The top display will say C - C or F - F to indicate that the unit is
now in Celsius or Fahrenheit respectively.
MUTE / UNMUTE FUNCTION
The unit beeps when buttons are pushed, knobs are turned and
when it goes into standby mode.
1. Ensure the hot air gun is in the holder.
2. Press and hold both the CH1 and CH2 buttons.
3. The bottom display will say “on” or “off” to indicate that the sounds
for the unit are unmuted or muted accordingly.
SETTING MEMORY PRESETS
1. When the temperature and air flow are set, press and hold any one
of the three memory preset buttons for approximately 5 seconds.
2. These settings are now programmed into that memory preset.
3. To quickly change to any of the presets, just briefly touch the
preset while the hot air gun is in use and it will start to change to
the appropriate settings.
4. To re-program one of the presets, set the temperature and air flow
parameters to the new settings and then press and hold the preset
to be programmed for approximately 5 seconds.
