Page8
Charging
Your scooter comes charged out of the carton. We still recommend charging the unit for
8-10 hours prior to it’s first use. We also recommend charging your scooter after each
use and prior to storage.
WARNING:
Do not
allow your scooter to go into deep discharge, as this will damage the
batteries.
Fig. 5
Fig. 10
Fig. 6
**Your scooter has a variable speed hand throttle. You can control the speed of your
scooter by the amount of pressure you use when rotating the hand throttle. The more
you rotate, the faster you will go.
1. Make sure unit is turned off.
2. Open the charging socket cover
located on the left side of the
seat/tank fairing. Fig. 6)
3. Locate your Battery Charger.
(Fig. 5) Find the charger socket
end plug it into the scooter.
4. Next, plug the AC plug into a wall
outlet.
When first plugged in, the charger has
two red lights that will illuminate at the
same time, indicating that the charging
process has started. Once the light on
the charger turns green, you may remove
the charger and close the safety cap.
RIDING
1. Make sure that all of the exposed bolts and screws
are tightened.
2. Raise the kickstand to its upright position.
3.
Turn the scooter on using the key switch located on
the right side of the seat/tank fairing.
4.
Gently rotate the THROTTLE GRIP, on the right
side of the handlebars. The XP-707 will begin to
move on its own power.
