14
Adjusting the Free Play of the Gear Selector – ONLY FOR THE
XG-575DS
1.) The gear selector mechanism uses the same system to adjust
as the front and rear brakes.
2.) Correct tension is achieved when gear selector is in 1
st
gear,
the scooter should free wheel backwards. When the scooter is in
2
nd
gear, it should not be able to free wheel backwards.
3.) It is critical to ensure that when 2
nd
gear is selected (Fig. 18) that the clutch arm
pressure plate (a) is 90° to the gearbox. This can be adjusted by (b). Ensure that the nuts
are securely fastened.
**FAILURE TO DO THE ABOVE WILL RESULT IN BEARING FAILURE!!
MAINTENANCE SCHEDULE
Proper care of your A-Blaze Signature Series XG-565 will ensure optimal performance and
longer life span. The following are a few maintenance suggestions that will keep your
scooter running in top condition.
Daily Maintenance
Perform each time you ride your scooter.
Clean the exterior of the unit with a soft, damp rag.
Check that all nuts and bolts are securely tightened.
Weekly/Monthly Maintenance
Check the starter, especially the cord and return spring.
Clear the exterior of the spark plug.
Remove the spark plug and check the electrode gap. Adjust it to 0.6mm or change
the spark plug.
Clean the cooling fins on the cylinder head and check that the air intake at the
starter is not clogged.
Clean the air filter.
Check the tires and brakes.
WARRANTY AND TECHNICAL SUPPORT
X-Treme Scooters offers a 90-day limited bumper-to-bumper manufacturers warranty on
all A-Blaze Signature Series XG-565 Gas Scooters that are purchased from an authorized
dealer or direct. Original purchase receipt required.
