Page7
PACKAGE CONTENTS
Your X-Treme X-500 comes with the following items in the box. Please locate
all of the following:
1. The X-Treme X-500 Scooter
2. 48V Battery Charger
3. Tool Kit
4. 20amp Fuse(s)
5. Product Handbook
6. Seat & Seat Post
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your X-500
Assembly
1. Carefully remove the X-500 from the box.
2. To unfold the X-500, begin by pressing
down on the FOLDING HANDLE with one
hand (Fig.1), while gently pulling up on the
handlebars with the other (Fig.2)
3. Fully extend the handlebars to their upright
position until you feel the mechanism lock
into place (Fig. 3).
4. Attach the handlebars by first attaching the
large handlebar clamp to the top of the
handlebar down tube. Then attach the
handlebars to the clamp. Tighten all bolts
after adjusting the handlebars to the
desired tilted position. (Fig. 4)
5. The BRAKE LEVER is in the down position
for shipping. Using the provided Allen
Wrench, loosen the tension bolt, and adjust
the levers to a comfortable position.
*BE CAREFUL NOT TO PULL ON THE
CABLES!
