21
Cable Barrel Adjustment
Note: Do not only adjust the cable tension to compensate pad wear. After replacing with new pads, check if the rotor and pad come in contact with each other. If so, you
need to adjust step pads and caliper again.
Warning:!
1. The pads and rotor must be kept clean and free from oil or grease-based contamination .If the pads become contaminated you must
discard and replace them with a new set. A contaminated rotor should be cleaned with a detergent solution, rinsed thoroughly and dried.
2. The disc brake pads, caliper and rotor get extremely hot during use. Serious injury could result from contact with a hot brake. Care
should be take to not touch the caliper, rotor or pads while the disc brake is hot. Be sure to allow the brake to cool before trying to service
it in any way.
3. Read all instructions thoroughly before attempting any work on a Tektro mechanical disc brake. Test your disc brake gradually on a
flat surface until you become accustomed to the braking power. If you lend your bike to another person, make sure that they are also
properly accustomed to the braking power before riding.
!
Summary of Contents for Baja 48V
Page 39: ...39 ...
