4
Power control / Temperature control mode
Battery Management
o
Support maximum up to 1.0A USB charging current.
o
Approximate 3 hour for 2600mAH LI-On battery.
Safety feature
o
Dry coil protection (only applicable for temperature control mode)
o
Coil overheat protection
Support Ni200, Ti01/02, SS316L, NiFe30, NiFe70, Nichrome N60. Refer to coil
material table for detail.
Protection temperature can be change through “X-Taste Advance”.
o
Real-time on-board temperature monitoring. Auto shutdown device if temperature
too high.
o
Real-time battery temperature monitoring. Auto shutdown device if battery
temperature too high.
o
Battery health condition checking feature. Able to give alert if battery not in good
condition.
o
Coil over voltage protection.
o
Coil over current protection.
o
Coil short/open circuit protection.
o
Weak battery protection.
o
Battery over charge protection.
o
Battery over load protection.
o
10 seconds maximum fire duration protection.
o
Battery reverses polarity protection.
Support firmware upgrading through USB port.
Screen lock features.
Coil resistance measurement features.
Real-time display data during fire on
o
Battery voltage, capacity
o
Coil resistance (power mode)
o
Sensing coil temperature (temperature mode)
o
Coil voltage
Auto power off features
o
Can be modifying through “X-Taste Advance”.
5 individual preset configurations.
Auto/left/right screen rotation.
Continuous short press “Fire ON” button 3 times to power on devices.
Smart auto lock coil resistance. No need to manual lock resistance for temperature control.
Using TCR or temperature coefficient based on type of coil material for more precise
temperature control and coil overheats protection.
X-Taste Advance software allow user to modify setting and operation of the device.
