11
FIGURE 4
This instruction manual complies with ASTM F2123 Standard Practice for Treestand Instruction.
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
STEP 9. Rotate the
seat support
down aligning the lower holes with
seat assembly.
Secure the front holes of
armrests, seat assembly, side frames
and
seat supports
using (2) 1/4"x 3 1/4" hex bolts (E), (4) nylon washers, and (2) 1/4" nylock nuts.
Note:
When attach correctly the
tab
should be inside. Then attach the rear holes of the
armrests
to the
seat support
and
seat assembly
using (2) 1/4"x 3 1/4" hex bolts (E),
(4) nylon washers and (2) 1/4" nylock nuts. (Fig. 3)
STEP 11. Attach the upper holes of the
armrests
to the
backrest supports
using (2)
1/4"x 2 1/2" hex bolts (D), (4) nylon washers, (2) 1/4" nylon spacers and (2) 1/4" nylock
nuts. (Fig. 4)
Note:
The
backrest support
should be in front of
tab.
STEP 10. Attach the
rear frame support
to the
seat support
using (3) 5/16"x 2 3/4"
hex bolts (F), (6) nylon washers, and (3) 5/16" nylock nuts. (Fig. 3)
STEP 12. Attach the
armrest
foams, armrest covers,
backrest support foam
and
backrest coveret
to
the
armrests
and
backrest
using velcro to secure.
(Fig. 4)
NOTE: SECURELY TIGHTEN EVERY NUT
AND BOLT AT THIS TIME.
WARNING! Backrest support is provided for comfort and should be used as backrest support only. The backrest
support not designed to carry the full weight of the user. Never place more than fifteen (15) lbs of force on the
backrest support. Failure to follow these instructions may result in serious injury or death!
Armrest
Backrest
Support
Foam
Backrest Support
Cover
[D]
[D]
Armrest
Armrest
Armrest Foam
Armrest
Foam
Armrest Cover
Tab
Armrest
Cover
