READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
ATTENTION!!
WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
4
FREEDOM HARNESS INSTRUCTIONS
WARNING! Before using this full-body fall arrest harness in the
follow these instructions may result in serious injury or death!
WARNING! You must store your full-body fall arrest harness out
of direct sunlight and out of any other harsh environmental condi-
these instructions may result in serious injury or death!
STEP 1.
Identify and become familiar with all parts of
your full-body fall arrest harness. (Fig. 1)
FRONT VIEW
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
REAR VIEW
Chest Strap
Waist
Loop
Leg Buckle
Leg Buckle
Padded
Tether
Carabiner
Leg Strap
Leg Strap
Waist
Loop
Lower
Torso
Strap
STEP 4.
With the leg strap
secured, connect the buckles
on the chest strap. Tighten
both the chest strap and the
lower torso straps by pulling
on the tag end (loose end) of
each strap. (Fig. 4) Once straps
are tight slide tag end (loose
end) of the lower torso strap
through the slots on the
lower torso pads to secure.
STEP 3.
Once the full-body fall
arrest harness is on. Slip each leg
strap between your legs and
engage the buckle. Pull the tag
end (loose end) of the strap to
tighten the legs straps for a
comfortable yet snug fit. Make
certain the leg straps and pads are
not twisted.(Fig. 3)
WARNING!
You MUST connect your
leg straps as outlined. Improperly
securing the leg straps and buckles can
and may lead to harness failure. Failure
to follow these instructions may result
in serious injury or death!
STEP 2.
With the buckles on the chest strap and leg
straps disengaged, slide one arm through the arm
hole in the full-body fall arrest harness. Repeat step
for other arm. (Fig. 2)
This instruction manual complies with ASTM F2337 Standard Test Method for Treestand Fall Arrest Systems.