X Rocker COSMOS 2020127, Manual

Page: 29 / 31

Safety notes
•
The user of the Neo Motion LED must have read and understood
these operating instructions prior to its first use in order to safely
use this product.
•
The LEDs must only be used when they functions properly. If the
LEDs or part of the LEDs are defective, please contact your retailer
for advice and cease to use the lighting function .
•
Always keep the operating instructions within reach.
•
If you sell or pass on the device, you must also pass on these
operating instructions.
•
Never use the LED function in a room where there is a danger of
explosion or in the vicinity of flammable liquids or gases.
•
The LEDs may only be connected to a grounded socket which
has been installed professionally, is grounded and checked.
•
Main power voltage and fuse must meet the Technical data
specifications.
•
If the power cable or the device is damaged immediately turn
off the plug and pull out the plug. Do not use the Cable again and
dispose of it properly.
•
Do not bend, crush or pull the cable, protect from sharp edges, oil
and heat.
•
If the LEDs are not in use make sure the plug is pulled out.
•
Do not touch the power connector with wet hands! Always
unplug by pulling the connector, not the cable.
•
Do not lift the bed using the cable or use the cable for pur-
poses other than intended.
•
The power cable may not be shortened.
RGB LED
‘
Neo Motion
’
Lighting Instructions
Risk of damage to the eyes! Never look directly into the LED.
The light can only be used in dry indoor areas.
Not suitable for ordinary lighting in household room
illumination
Button Function
(1) Increases the brightness upwards.
(2) Reduces the brightness downwards.
(3) Switches the LEDs off.
(4) Switches the LEDs on.
(5)
–
(8) Changes between the colours red, green, blue and white.
Storage and transport
Storing
–
Store the device and any accessories in a dry, wellventilated place.
–
In case of longer periods without operation, protect the LEDs and its
accessories against soiling and corrosion.
Disposing of the packaging
Transport
–
Use the original packaging to ship whenever possible.
Troubleshooting
If something stops working
…
DANGER! Danger to life and limb! Improper repairs can result in
the product functioning unsafely. This endangers yourself and your
environment.
Malfunctions are often caused by minor faults. You can easily remedy
most of these yourself. Please consult the following table
before contacting the vendor. You will save yourself a lot of trouble
and possibly money too.
9) Changes colours quickly without blending.
(10) Changes colours slowly without blending.
(11) Changes all colours blending the transmissions.
(12) Changes colours without visible blending.
(13) Switches to any selected colour.
DANGER! Risk of fatal injury due to electric shock! All work to
eliminate possible faults should be carried out with the fuse
switched off. All work should be carried out by a
qualified electrician.
Fault/malfunction Cause Remedy
The lamp does not
light up No mains voltage?
Light source defective?
LED Lights switched on via
switch?
Switch defective?
Connection cable defective?
Incorrect connection?
Check fuse. Contact a specialist.
Contact our help desk for support
Check switch position
Contact a specialist.
Contact a specialist.
Switch off the fuse and check the
connection according to the wiring diagram.
Contact a specialist.
If you can
’
t fix the fault yourself, contact X Rocker support. Please be
aware that any improper repairs will also invalidate the warranty and
additional costs may be incurred.
Disposal
Disposing of the device
A crossed-out wheelie bin icon means: Batteries and
rechargeable batteries, electrical or electronic devices
must not be disposed of with household waste. They may
contain substances that are harmful to the environment
and human health.
Consumers must dispose of waste electrical devices, spent portable
batteries and rechargeable batteries separately from household
waste at an official collection point to ensure that these items are
processed correctly. Information on returning these items is available
from the seller. Sellers are required to accept these items free of
charge.
Batteries and rechargeable batteries, which are not per-
manently installed in waste electrical devices, must be
removed prior to disposal and must be disposed of sep-
arately. Lithium batteries and battery packs in all systems
must only be retuned to a collection point when dis-
charged. Batteries must always be protected against short circuits by
covering the poles with adhesive tape.
All end users are responsible for deleting any personal data stored on
waste devices prior to their disposal.
Disposal of batteries
Disused batteries do not belong in domestic refuse; they must be
disposed of as prescribed by regulations.
–
Bring batteries which are no longer usable to the battery collection
point of the dealer or of your local authority.
–
Do not burn batteries. Risk of explosion!